摘  要：為有效防止塔式起重機傾翻，以檢測直接反映塔機傾翻力矩大小變化的工作狀態輪壓為基礎，通過確定并限制目標輪壓來限制傾翻力矩。用常規的靜態計算法對最不利工況下的輪壓進行計算，獲得輪壓變化規律，給出目標輪壓限定值，提出涉及檢測方案設計、傳感器選型、傳感器安裝設計及電路設計的輪壓檢測方法，為完善塔式起重機防傾翻方案提供了新思路。
關鍵詞：塔式起重機；抗傾翻穩定性；傾翻力矩；起重力矩；輪壓檢測
中圖分類號：TH213.302；TB931；TM930.12；TP212.9    文獻標志碼：A     文章編號：1674-5124（2013）05-0016-04
Design tip-over prevention plan for tower cranes based on wheel load test
ZENG Kui
（Sichuan College of Architectural Technology，Deyang 618000，China）
Abstract: To effectively prevent the tower crane tipping， overturning moment was limited through identifying and limiting the target wheel load for the working wheel load status directly determine the size of the overtuening moment. The wheel load under the worst working condition was calculated with the general static calculation method to get the change rule of wheel load and target wheel load limits. And the wheel load detection method was proposed， which includes detection scheme design， sensor selection， sensor installation design and circuit design. This method offers a new way to perfect tower crane tip-over prevention plan.
Key words: tower crane； anti overturning stability； overturning moment； load moment； wheel load test