韓志鑫1， 付志勇1， 霍志民2， 陳桂生1， 楊  銳1， 趙  茜1
（1. 中國測試技術研究院，四川 成都 610021； 2. 攀鋼集團成都鋼釩有限公司，四川 成都 610303）
摘  要：為完善嵌入溫場型溫度記錄儀相關的實驗室校準方法，針對目前其校準方法存在的問題，分析它的測量原理和實際工作環境，按照使用手冊和現有檢定規程，提出將記錄儀置于可接受的不同的工作環境溫度下進行校準的方法，并且按照提出的校準方法完成了實驗和數據分析。實驗結論證明了所提出的嵌入溫場型溫度記錄儀校準方法的正確性和必要性。
關鍵詞：熱處理爐；溫度監測；嵌入溫場型溫度記錄儀；測量原理；校準方法
中圖分類號：TB942；TH811；TP206+.1；TP216        文獻標志碼：A       文章編號：1674-5124（2013）03-0024-03
Research on calibration method of embedded temperature field recorder
HAN Zhi-xin1， FU Zhi-yong1， HUO Zhi-min2， CHEN Gui-sheng1， YANG Rui1， ZHAO Qian1
（1. National Institute of Measurement and Testing Technology，Chengdu 610021，China；
2. Pangang Group Chengdu Steel & Vanadium Co.，LTD.，Chengdu 610303，China）
Abstract: In order to promote the relevant calibration mthods for the embedded temperature field recorder， and overcome the problem existing in the present calibration methods， this paper analyzed the principle of measurement and the actual working environment， and put forward the calibration method which can put the calibrating recorder in different and acceptable temperature working environment according to the user manual and the verification regulation. The calibration experiment was completed in accordance with the proposed calibration method， and the experimental data were analyzed. The experimental results proven that the calibration method of embedded temperature field recorder is correct and necessary. 
Key words: heat treatment furnace； temperature monitoring； embedded temperature field recorder； measurement principle； calibration method